HOW TO MAKE PLASTILINE – 7 recipes


[ad_1]

Sculpting something is useful and exciting, especially for preschool children, for whom it is extremely important to develop hand motor skills, imagination, and creative thinking. It’s easier, of course, to go and buy plasticine. It is more profitable, more useful and more interesting – to do it yourself. After all, you get an absolutely safe mass of improvised means that can be found in every kitchen.

Catch 7 recipes on how to make plasticine at home.

An example of working with homemade plasticine

DIY plasticine

The best variations are described below in the text. They are suitable for long-term modeling or one that dries quickly and is suitable for decoration.

It will be interesting: The best kind games: 14 TOP games for any age

How to make plasticine from dough

Baking soda plays a key role in this recipe. It gives the kneaded lump plasticity and airiness. Working with him is a real pleasure.

Homemade dough clay

What is useful

  • Tablespoon of sunflower oil
  • 20 g of salt
  • 120 g wheat flour
  • 10 g baking soda
  • Glass of water.

How do we do

  1. Combine all ingredients and mix them well.
  2. Knead a homemade mixture for modeling. Heat it over low heat, stirring all the time, until the plastic mass begins to lag behind the walls of the dish.
  3. Remove from fire and let cool.
  4. Then they crush him at the final stage.

If you want to make bright plasticine, you can add food or other dye at the first stage. At the last stage, you can add sparkles.

Products from such a plastic mass will dry completely in 24-36 hours. Drying time depends on the thickness and size of the figurine.

Read: Top 5 best board games for kids

How to make plasticine from PVA glue

This method is for those who do not want to spend a lot of time and effort. You just need to combine 2 products in a 2: 1 ratio of components.

How to knead home clay

What you need

Corn starch and PVA glue.

Starting to do

  1. Starch is poured into a deep bowl.
  2. Gradually fill it with glue, stirring.

If the consistency is too crumbly, pour more glue. If it’s liquid, it means it lacks starch.

When 2 products are combined, it’s time to add paint – gouache or watercolor. It is advisable to cut the plasticine into pieces and mix a few drops of paint into them. Such a plastic mass dries quickly. Therefore, you need to sculpt immediately.

Air plasticine: how to make

Features of plastic clay is that products from it dry quickly. They become solid, but at the same time weightless.

Air plasticine

What you need

  • a cup of cornstarch,
  • one and a half cups of water
  • 2 cups of baking soda.

Cooking method

  1. Combine soda and starch.
  2. Add water and stir until lumps dissolve.
  3. If you plan to use paint, it’s time to top it up until you’re happy with the color.
  4. Heat the mass for modeling over low heat, stirring so that it does not burn.
  5. When bubbles appear, stir for about 5 more minutes. If the dough has become too thick and it is already inconvenient to interfere, remove from heat.
  6. Leave the mixture to cool, covering with a damp towel so that it does not dry out.
  7. Cold plasticine needs to be kneaded well again. After that, you can start sculpting.

If there is no dye, you can paint the products after hardening with acrylic or other paints.

It is interesting to read: What can be done from a Lego constructor: TOP 10 ideas

How to make light clay from starch

The plastic mass with starch is incredibly airy and light. By this method, you do not need to cook anything, we will use the microwave.

What you need

  • A glass of cornstarch
  • 30 g vinegar
  • 30 g rapeseed or other vegetable oil
  • 200 ml PVA glue

Cooking method

  1. Mix all the ingredients so that there are no lumps left.
  2. Put the mixture in the microwave, set for 2 minutes at 800 watts.
  3. Take out and mix. Then again in the microwave oven for two minutes.
  4. The mixture should be thick and sticky.
  5. When it cools, mix again, greasing your hands with oil. So the plasticine will not stick to them.

It is important not to overdry the mass. If it is not elastic and falls apart, then it is overdried. Therefore, you need to control the process, focusing on the power of your microwave.

How to make clay from flour and salt

Many people have known this method since childhood. It is simple – just a few steps.

Products from home plasticine

What is useful

  • 400 g flour
  • 30 g rapeseed or sunflower oil,
  • ¾ cup of water
  • 2 cups of salt.

How to do

  1. Combine dry foods and butter.
  2. Knead by adding water.

Blinded figurines can be baked in the oven or dried. After drying, decorate with gouache.

How to make plasticine with alum

Preparing mass for modeling with the addition of inexpensive mineral powder is quite simple. Alum – a pinch to give elasticity, important for sculpting.

plasticine product

What you need

  • 1 h. l. Kvastsov
  • a cup of flour
  • water
  • Polchashki year.

Cooking method

  1. Combine loose, pour in a little water. The consistency should be like thick clay.
  2. Stir until smooth.

If the plastic mass turned out to be rigid, it must be diluted with water.
In order for the figurines to dry quickly, they are placed in the oven for 3 hours at a temperature of 250 ° C.

Useful for parents: How to choose a constructor for a child: 3 tips

How to make homemade plasticine with oatmeal

Such a plastic mass will definitely appeal to little children. In addition, it is absolutely safe to work with her. After all, it does not contain glue or other toxic components.

What is useful

  • 200 g cereal
  • ⅔ cup flour
  • 100 g of water.

How to do

Everything needs to be mixed. Optionally, drip dye – without it, the plasticine will be gray.

Modeling with homemade plasticine: tips

At work, the same questions often arise. Their answers are below:

Working with homemade products is a lot of impressions. Try it and write reviews about your experience. It is important.

Good to know: How to make marshmallow in the dryer – 4 points that affect color, taste and appearance

[ad_2]

Leave a Reply