kids-toy

The correct formation of the foot, posture and gait of the child depends on the choice of children’s shoes. Poor quality products can increase the risk of developing flat feet and curvature of the spine. In addition, ill-fitting winter shoes can lead to hypothermia in a child. Therefore, special requirements must be imposed on such products.

The best manufacturers of winter shoes for children

Before entering the market, shoes undergo many tests for strength, sanitary-chemical and toxic-hygienic indicators, compliance with state standards, etc., after which they receive certificates of conformity. Only then can it be called quality.

Such shoes are durable and have good thermal insulation properties. In it, the child is warm and comfortable, it is absolutely safe and does not contain toxic substances.

These requirements are met by the products of the following manufacturers:

1. Viking;
2. Columbia;
3. Kotofey;
4. Dei-tex;
5. Kapika;
6. Scandia;
7. Eco;
8. Kuoma;
9. nordman.

Types of winter shoes

Leather boots

Classic shoes for the winter. Most often it is made from genuine leather and fur insulation. It is designed for temperatures from +5 to -15°C.

Felt boots

This is the perfect shoe for harsh winters and walking through snowdrifts. Felt boots keep baby’s feet warm even at -30°C. Classic lambswool models have a one-piece shape, but many manufacturers have modernized this product. Modern felt boots have a sole and a hard back – this is necessary for the correct formation of the child’s foot and the prevention of flat feet. Such shoes can be chosen 1-2 cm longer, because. she has the ability to “sit down”. You should not buy boots in bright colors, they may be of poor quality.

Fur boots

These shoes are used during severe frosts. It is made from reindeer skins (fur on the outside). The inside of the fur boots is often insulated with fur or felt. The soles of modern models, as a rule, are made of rubber, due to which the child is not slippery in winter.

Membrane shoes

Membrane materials are often used in the production of winter shoes, which make the product lighter, allow it to “breathe” and protect it from moisture. These shoes can be worn in autumn and winter.

Material

Top

Choose models in the production of which natural materials were used (usually leather). Such products adapt to the shape of the child’s foot, they pass air well, preventing excessive sweating. Leather models are frost-resistant, wear-resistant and durable.

Refuse leatherette products. This material wears out quickly, does not breathe and bursts in the cold. In addition, in such shoes, the baby’s legs often sweat.

Take your time to choose models from nubuck and suede. Such materials quickly deteriorate under the influence of dirt and water. In addition, they require special care. They need to be cleaned with a special brush and treated with water-repellent creams.

Sole

The sole of winter shoes should be glued and stitched “in good faith”. It is also important that it be flexible. Try to bend the product in half. If you do this without much effort, then the sole fits.

For winter shoes, it is also desirable to have a tread – deep carved patterns. Thanks to this, the baby will keep his balance well on icy roads.

In the production of soles for children’s shoes often use:

1. Polyurethane. This outsole is lightweight, flexible and durable. But it is very slippery, and under the influence of low temperatures (below -20 ° C), faults can form on it.
2. Thermoplastic elastomer. Differs in good frost resistance and elasticity. It is a strong and durable material that provides a strong grip on the surface and reduces the risk of falls.
3. Polyvinyl chloride. It is characterized by low frost resistance – at temperatures below -20 ° C it can crack. It is also quite heavy and wears out quickly.
4. Thermoplastic rubber. It is a durable, abrasion-resistant and non-slip material. In addition, rubber is characterized by good flexibility and frost resistance.

Insole

The insole in children’s shoes should be made from natural materials, ideally fur. It will not let the child freeze and at the same time allow the leg to “breathe”.

What to look for when buying

1. When choosing winter shoes, pay attention to the insulation. An excellent option would be models with natural fur, felt or products with a membrane layer.
2. It is permissible to choose models 1-1.5 cm longer than the length of the child’s foot, because. shoes will have to be worn with warm socks. At the same time, a layer of air should remain in order to increase the thermal insulation properties.
3. The legs of the child should be well fixed and not hang out.
4. You can not choose tight shoes, because. in it, the child’s legs will freeze more, and blood circulation will be disturbed.
5. Try to buy light weight products. In heavy shoes, the baby will quickly get tired and eventually begin to shuffle his feet.

Rate the article
	Total votes: 0rating: 0

Attention! This material is the subjective opinion of the authors of the project and is not a purchase guide.