Building Kit 75333 Obi-Wan Kenobi’s Jedi Slayer


Over the summer season, the LEGO Star Wars series has been replenished with several interesting sets. Among them there are large and expensive ones, but there are also smaller ones at a very affordable cost. These are the options constructor 75333 Obi-Wan Kenobi’s Jedi Fighter. This set can already be found on sale in official Lego stores and various toy stores. You can buy it for $29.99.

75333 Obi-Wan Kenobi's Jedi Slayer Review

75333 Obi-Wan Kenobi’s Jedi Fighter General Specifications

75333 Obi-Wan Kenobi's Jedi Slayer Review

Plot Designer 75333 Obi-Wan Kenobi’s Jedi Fighter based on episode II of Star Wars: Attack of the Clones. Includes 282 pieces and 3 minifigures. The toy is packaged in a stylish branded box in a design typical of the entire LEGO Star Wars series. A prefabricated set is intended for an audience over 7 years old.

75333 Obi-Wan Kenobi's Jedi Slayer Review

The front of the box shows a close-up of a fighter jet flying in Kaminoan’s stormy weather. There are also 3 minifigures in the lower right corner.

75333 Obi-Wan Kenobi's Jedi Slayer Review

On the back of the box are several game features and an alternate view of the model.

75333 Obi-Wan Kenobi's Jedi Slayer Review

The package also includes a user manual, designed in a new style. The main difference from the previous versions is a simpler cover design.

75333 Obi-Wan Kenobi's Jedi Slayer Review

There is also a rather large sheet of stickers in the package. But all of them are quite understandable, it will turn out to use them without much difficulty.

What minifigures are included in 75333 Obi-Wan Kenobi’s Jedi Slayer?

Into the designer’s package 75333 Obi-Wan Kenobi’s Jedi Fighter Includes 3 minifigures.

They are represented as characters:

  • Obi-Wan Kenobi;
  • astromech droid R4-P17;
  • Town We.

75333 Obi-Wan Kenobi's Jedi Slayer Review

The first minifigure is an Obi-Wan Kenobi character. For decoration, a completely new print on the body and legs is used. The printed outfit depicts a Jedi robe and looks very interesting.

The figure has standard brown hair and a new reversible head! On one side is a gold Jedi pilot’s headset, necessary for the successful piloting of a fighter. On the other hand, the head is quite ordinary and suitable for displaying any plot.

75333 Obi-Wan Kenobi's Jedi Slayer Review

The back of the torso is finished with several printed lines that convey the texture of the robe.

75333 Obi-Wan Kenobi's Jedi Slayer Review

For the character Obi-Wan, the set includes a reliable blue lightsaber and a brown hood. By the way, the hood is made in a new design and is presented in this shade for the first time. As for the lightsaber, its blade is displayed in a new cloudy style in a translucent blue tone.

75333 Obi-Wan Kenobi's Jedi Slayer Review

The second figure in the buildable set is the R4-P17 astromech droid or simply R4. In 2022, its LEGO parts have been updated. Therefore, now the droid has new prints of the head and body. There are quite a lot of printed elements on the torso of R4, which gives the character an additional appeal.

75333 Obi-Wan Kenobi's Jedi Slayer Review

The back of the R4 body looks more concise. Although some of the newer sets have already featured astromech droids with an improved design on the back.

75333 Obi-Wan Kenobi's Jedi Slayer Review

The third minifigure in the buildable set is Town We character. She stands out from the other figurines by being taller thanks to a brand new head with an elongated neck. Therefore, in comparison with other heroes, it looks head and shoulders above.

Town We’s attire harmoniously combines blue and white. This color scheme makes the appearance of the figure especially spectacular.

75333 Obi-Wan Kenobi's Jedi Slayer Review

From the back, the details of the new head are clearly visible. You can see the printed silver ribbon that wraps around the figurine’s skull. There is also a seal on the back of Town We’s torso, which completes the look of the minifigure.

75333 Obi-Wan Kenobi's Jedi Slayer Review

In the national team 75333 Obi-Wan Kenobi’s Jedi Fighter It features a splendid cast of characters, especially given its size. All figurines look dignified and have become a real decoration of this set.

75333 Obi-Wan Kenobi’s Jedi Slayer Specifications

75333 Obi-Wan Kenobi's Jedi Slayer Review

With details Designer 75333 Obi-Wan Kenobi’s Jedi Fighter users will only need to assemble the main model. The Jedi Slayer comes in a nice white and red-brown color scheme. In finished form, the toy looks very attractive. This was largely facilitated by the use of new wedge-shaped plates, which have recently appeared in LEGO.

75333 Obi-Wan Kenobi's Jedi Slayer Review

A transparent round dome covers the top of the cockpit. A feature of this device is the ability to turn forward. This leaves enough space for the pilot. The cab also features a beautiful brick seat with headrest and a slanted control panel with printed pieces.

75333 Obi-Wan Kenobi's Jedi Slayer Review

The rear of the fighter uses green parts and two round yellow 2×2 engines, which are attached with technical pins. Interestingly, the rear fin is assembled using two 4×4 plates pointing in opposite directions. Although this technique is not new, it has proven itself in prefabricated sets.

75333 Obi-Wan Kenobi's Jedi Slayer Review

The top of the R4-P17 is mounted on a turntable on the left wing of the ship, keeping it spinning. A special place is provided in the center of the ship to store the R4 hull. Thus, the safety of half of the body of the astromech is ensured. Without this, it could have been lost when the ship turned around.

75333 Obi-Wan Kenobi's Jedi Slayer Review

The front of the Jedi Fighter has 2 new stud shooters with translucent light green ammo. They come in a noticeable metallic gray color and have a somewhat awkward shape.

75333 Obi-Wan Kenobi's Jedi Slayer Review

The underside of the ship contains some important details. For example, there is one retractable landing gear and two clips for Obi-Wan’s lightsaber.

It should be noted that the wings of the ship are attached using Technic axle connecting beams at an angle. This approach provides a reliable connection, but there is a visual problem …

75333 Obi-Wan Kenobi's Jedi Slayer Review

This is how the ship model looks with the landing gear retracted. At the same time, the back of the ship literally sits on black inverted slopes.

75333 Obi-Wan Kenobi's Jedi Slayer Review

In general, the Jedi fighter looks quite good, although it has problems with formation. For example, the bow of the ship does not taper to the required point.

But most of all, the model has gaps between the wing and the middle section.

75333 Obi-Wan Kenobi's Jedi Slayer Review

These gaps are formed due to the use of technical connectors for fastening the wings. At the same time, they pass along the entire length of the ship.

Particularly worsening the view are the gaps in the front, through which the entire ship is visible through and through. In this case, several plates with guides are clearly missing. Such simple details could hide some of the gaps in the prefabricated structure.

75333 Obi-Wan Kenobi's Jedi Slayer Review

In addition, there is a somewhat awkward slope from the cockpit to the nose – it drops quite sharply in the middle and is completely flat in the nose area. Although for some this problem may seem quite insignificant. Moreover, it is partly caused by the need to install the astromech body in the center of the fighter.

Finally

Despite the shortcomings, in general constructor 75333 Obi-Wan Kenobi’s Jedi Fighter creates the best impression.

I especially like it:

  • decent selection of minifigures;
  • good appearance of the main model;
  • affordable price.

Among the shortcomings, it should be noted, perhaps, the gaps in the structure that form around the wings. Many users still don’t like stickers, but in this set they can be put up with.

In any case, for fans of the Star Wars series, this set will be a good purchase. With it, you can complete your collection of interesting characters in the form of LEGO minifigures. And the main model – the Jedi fighter from this set also deserves the attention of Lego fans.

75333 Obi-Wan Kenobi's Jedi Slayer Review

Leave a Reply